9
Revision date: 08.26.15
Assembly Instructions
3
ASSEMBLE SUPPORT FRAME FOR BENCH TOP—continued
13. Move to the lower strut connection and
reposition band clamp as needed.
16. Move to the mid support and check its position.
Attach the struts to secure that support in
place. Verify that legs are plumb.
17. Repeat for remaining mid support(s).
14. Using a level, verify that the support leg is
plumb/vertical. Adjust support assembly and
strut as needed and tighten band clamp bolt.
18. Move to the final end support assembly and
attach those struts. Verify that round pipe is
flush with the outside edge of pipe straps.
15. Repeat to attach the remaining strut for the
first end support assembly.
19. Return to each pipe strap and install an
FA4482B Tek screw through the strap and into
the pipe.
20. Continue with the next procedure.
