3
Revision date: 11.10.10
CARTS AND WAGONS
Parts List and Tools Required
1. Position the cart bed on a flat surface so both sides
can be accessed. With assistance, place the axle
assembly on the bed and align all mounting holes.
2. Insert two 5/16" x 1-3/4" bolts through the bed and
through the mounting holes of the axle assembly,
add flat washers, and locknuts.
3. Slightly tighten bolts using a ratchet and socket
and wrench. Do not fully tighten at this time. Allow
some play so you can align the remaining bolts.
4. Insert two 5/16" x 3/4" bolts through the bed and
axle brace, add washers and locknuts, and tighten.
5. Finally, insert two 1/4" x 1/2" bolts through the bed
and axle brace, add flat washers and locknuts, and
tighten. (These are the two smallest bolts.)
6. Return to main bolts (Step 2) and tighten.
1
ATTACH FRONT AXLE TO CART BED
1
ATTENTION:
Position all locknuts
and washers on the underside of
the cart bed as shown.
4
3
2
5
Socket and Ratchet
Wrench
Front Axle (1)
5/16" x 1-3/4" Hex Bolts
(2)
Cart Bed (1)
5/16" x 3/4" Hex Bolts
(2)
5/16" Flat Washers (4)
5/16" Locknuts (4)
1/4" x 1/2" Hex Bolts (2)
1/4" Flat Washers (2)
1/4" Locknuts (2)
To prevent damage to the
bolts, do not overtighten.
Bolts should be snug.
All nuts will be on the
underside of the cart bed
when installed correctly.
