3
Revision date: 06.22.11
CARTS AND WAGONS
Parts List and Tools Required
To better align the rack, do not fully
tighten the bolts until the entire rack
is assembled.
Position pipes so the
countersunk hole is to the outside for
bolt installation.
On a flat surface, assemble one end
1.
frame as shown. Insert pipes into
each other until the spring-loaded
button snaps into place.
Using two (2) long bolts, and two (2)
2.
washers, secure the #6 Pipe to the
end frame.
NOTE:
In some instances, the bolts
included with the rack may all be the
same length. Proceed as instructed
and disregard the length references.
Thread a caster onto the end of each
3.
#1 Pipe.
Repeat the steps to assemble the
4.
remaining end frame.
1
RAFTER ASSEMBLY
Socket/Wrench Set
Pliers
Long Bolts (4)
Washers (4)
Casters (4)
#3 Pipe (2)
#1 Pipe (4)
#8 Pipe (2)
#2 Pipe (2)
#6 Pipe (2)
Diagram not to scale.
Caster
Caster
#1 Pipe
#1 Pipe
#2 Pipe
#6 Pipe
#8 Pipe
#3 Pipe
Long Bolt &
Washer
Long Bolt &
Washer
