22
Farmnavigator G7 Dataseed – User Manual
In the “Guidance options” menu it is possible to set “RECORD / PAUSE
FROM EXTERNAL ACTIVATOR”. This option allows you to connect an
external device to the “Generic Device” serial port through which to start or
pause the recording of points without touching the buttons on the screen.
Read Par 3.4 for more info on how to install an external activator.
2.3.3 Work view Layout
In the “Work view layout” menu it is possible to change the background
of the work page.
2.3.4 Units
In the “Units” menu it is possible to change the units of measurement of
area, speed, distance and range.
2.3.5 User preferences
In the “User preferences” menu, you can adjust the display brightness,
language and other localization preferences.
Figure 2.3.5.a - User preferences menu
2.3.6 Remote control
In the “Remote control” menu it is possible to pair the G7 Dataseed to
the remote control (available as an accessory). To enable communication
between the remote control and the G7 Dataseed:
1. Select “REMOTE CONTROL RECEIVER” and tap “ON” to turn it on;