Farmi Forest Corporation VALBY HF 231, Operation, Maintenance And Spare Parts Manual

Page: 6 / 36

SAFETY INSTRUCTIONS
HF 231
www.normet.fi
03294709
--- 6 ---
2.3.SAFETY INSTRUCTIONS FOR THE HYDRAULIC UNIT
D
D D
D
Before performing lubrication work on any equipment, consult the manufac-
turer’s instruction manual and follow the recommended procedures.
D
D D
D
Before lubricating the machine, shut down the engine and stop the ma-
chine.
D D D D Pressurized oil can be hazardous. Pressurized oil jet can penetrate skin and
cause serious injuries or death.
D
D D
D
Occasional skin exposure with oil is not dangerous. If though you can not
prevent long ---time exposure use protective gloves and other protective
clothing.
D D D D Keep flammable material away from heat, sparks and open fire.
D
D D
D
Hot oil and oil spray can be hazardous. Small amounts swallowed or inhaled
do not usually cause toxication. Old oil is more dangerous than new.
D D D D If oil has got into eyes flush them with cool water after which go to doctor.
Use safety goggles.
D D D D Avoid mixing lubricants of different grade and quality. Use only recom-
mended oils or oils with corresponding characters.
2.4.SAFETY INSTRUCTIONS FOR THE SEPARATE HYDRAULIC MOTOR USE
D D D D
Check the moving parts. They should be fastened in place, in good working
condition and all shields and guards must be in place.
D
D D
D
Inform everyone who works with the chipper about the risks and how they can
avoid accidents.
D D D D
Do not let children or incapable persons operate the chipper.Do not wear loose
clothing, loose sleeves, neckties or long uncovered hair around moving parts
of machinery.
D D D D
Disengage the PTO and turn the tractor off before you service the chipper.
D D D D
Use only original parts replacements. Do not make any modifications.
D D D D
Failure to obey the warnings printed on the chipper or in the operator’s manual
might result in a serious injury or death.
D
D D
D
When checking the malfunction, all devices must be in “off” position.
D D D D
Place the PTO shaft in the holding device when disconnected from tractor.