Farmi Forest Corporation 100, Operation, Maintenance And Spare Parts Manual

Page: 16 / 32

FARMI 100
16
MAINTENANCE
REPLACING HYDRAULIC HOSES
• When changing hydraulic hoses, clean the new
hoses, at least with compressed air.
• Check that the hoses are connected properly after
the change.
• If any hoses are removed for long periods of time,
protect the ports properly.
• Let the pump rotate slowly to bleed the air from
the system after changing hoses or components.
CHECKING TIRE PRESSURE
• Only use appropriate tools for checking and adjus-
ting tire pressure.
• Do not exceed the recommended maximum
pressure.
• Check tyre pressure.
400/60-15,5 14 PR 3,6 bar max.
OBJECT ACTION
Maintenance interval, working hours
8 h,
or after working shift
50 h,
or after working week
After 250 working hours or
once a year
General Check cylinders and
leakages in hoses
Check pins and lockings
Check fastening bolts
Check the condition of
primary structures
Drawbar eye Lubricate axis of rotation
of the drawbar eye
Check torque of the
mounting screws
Drawbar joint
Lubricate slide bearings Check torque of the jour-
nal
Hydraulic stee-
ring cylinder
Lubricate swing bearings
Check condition of pis-
ton rod and piston rod oil
scraper
Check condition of hoses
and couplings
Check journals and locks Check cylinder bearings
Bearings of the
floating bogie
Lubricate slide bearings Check journal lock for
correct seat
Check condition of the slide
bearings
Load backrest,
adjustable sets of
bolsters, tandem
bogie
Check torque of bolts and
nuts
Tires Check condition of tires,
torque of mounting sc-
rews and tire pressure
Hubs
Check condition of the hub
bearings
Lubricate bearings
Check condition of the brake