27
|
39
10 MACHINE ADJUSTMENT
1 – Tow bar – Adjustment of machine longitudinal plane
2 – Levelling discs
3 – Axle – lifted for work
4 – Setting the working depth of tracing wheels
5 – Spots for setting the working depths
10.1 Machine working depth adjustment
• Setting of soil processing depth is executed on lifted machine through adding or removing of distance
washers on hydraulic cylinders.
• The same number of washers must be set
on all piston rods!!!
•
The table shows the individual working
positions and number of washers needed to
achieve the required machine depth.
•
Specified working depths at individual
positions are only for information. They may
vary according to particular soil conditions. It
is possible to add or remove a required
number of washers as needed.
Summary of Contents for TRIOLENT TX 470 PS
Page 2: ...2 39 Prepared by Technical Department Farmet a s on 26 3 2018 changes reserved ...
Page 4: ...PREFACE 4 39 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 39 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 39 ...
