Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
40
│
56
By shortening the L
p
spring length, the force of the spring is increased and the effect of the unloading of
the central frame is greater. The permissible spring preloading against the standard dimension is
maximally -15mm“.
8.2
ADJUSTING THE LENGHT OF THE DRAWBAR -LT
Always adjust the length of the drawbar when the machine is in standstill and unfolded in the working
position.
When adjusting, always observe generally valid labour safety regulations.
Recommendations when to change the length of the drawbar L
t
:
8.2.1
SHORTENING THE DRAWBAR
o
The piston-rod is maximally drawn out when the side frames have been folded but the side frames are
not resting on the stops of the central frame. There is a risk of damage to the frame structure during
transportation.
8.2.2
EXTENDING THE DRAWBAR
o
The piston-rod is not maximally drawn out when the side frames have been folded into the transport
position but the side frames are already resting on the stops of the central frame. There is a risk of
damage of the frame structure due to forces caused by the hydraulics.
L
t
FOLDING
PISTON-ROD
MAX.1005mm
