Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
15
│
56
1.
DESCRIPTION
Kompaktomat is structurally designed as a semi-carried folding machine aggregated behind a tractor. The
machine consists of a towing fork and supporting frames where the individual working parts are installed. The
modular design of the machine allows selecting various types of working parts so that the machine meets the
high demands of any soil conditions.
The basic version of the machine (see p. 4) combines seven soil-processing operations in a single pass.
The control for folding the side frames into the transport or working position is designed as a single
independent hydraulic circuit controlled by the driver in the tractor cabin.
The control of the axle in the transport or working position is designed as a single independent hydraulic
circuit controlled by the driver in the tractor cabin.
The Kompaktomat machines meet the regulations for road traffic = width up to 3m + height up to 4m.
The design of the Kompaktomat machine allows using a whole range of additional equipment to increase
productivity and efficiency.
A.
HYDRAULIC LEVELLERS… the automatic front leveller position control system using an independent
hydraulic circuit controlled by the driver in the tractor cabin.
B.
HYDRAULIC DEPTH… the automatic share depth control using an independent hydraulic circuit
controlled by the driver in the tractor cabin.
C.
REAR THREE-POINT HITCH …the design of the rear three-point hitch to which it is possible to attach
other equipment for soil cultivation, or a pneumatic seed drill to Kompaktomat.
Tra
ck
cu
ltiv
at
o
r
w
ith
sw
ee
p
s
Fron
t
le
ve
lle
r
Fron
t
b
ar
r
o
lle
r
Sw
e
ep
se
ctio
n
Lev
elli
n
g b
ar
Re
ar
cru
m
b
ling
ro
lle
r
Re
ar
fin
is
h
in
g
le
ve
lle
r
3
-p
o
in
t
h
itch
to
w
in
g work
3
