Manual
FANTOM 850 PS
15
│
33
3.1.
AGGREGATION TO A TRACTOR
The machine can be connected only to a tractor, whose curb weight is identical or higher than the overall
weight of the connected machine.
The machine operator must observe all generally valid regulations of work safety, health protection, fire
safety, and environmental protection.
The operator may connect the machine exclusively to a tractor that is equipped with a rear three-point
suspension and a functional undamaged hydraulic system.
Tab. 4 – The table of requirements for the towing means for work with the machine:
(5)
Requirement for the tractor engine power for cultivator FX 850 PS
245 - 370 kW
(6)
Requirement
for
tractor
aggregation
(7)
Spacing of the lower suspension joints
(measured at the joint axes)
1010±1,5 mm,
(possible to set also 910±1,5 mm)
(8)
of the hole of the lower suspension
joints for the machine suspension pivots
37,5 mm
Bottom fixed hitch height
500 – 600 mm (19.7 - 23.6 in)
Bottom
fixed
hitch
aggregation
mechanism
Pin Ø50 mm (1.96 in)
Pin Ø70 mm (2.75 in)
Ball K80
(9)
Requirement for the tractor's
hydraulic system
(10)
Frame folding circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
(11)
Axle lifting circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Rollers lifting circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Front tool control circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Levelling disc circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Connect the machine using the TPS suspension bar to the lower arms of the rear TPS of the tractor, secure
the TPS arms using pins against disconnecting.
When connecting, no persons may stay in the space between the tractor and the machine.
