13
|
59
5 WORK SAFETY LABELS
Warning safety labels serve for operator protection.
General:
•
Strictly observe the warning safety labels.
•
All safety instructions also apply to other users.
•
Upon damage or destruction of the aforementioned "SAFETY LABEL" located on the machine, THE
OPERATOR IS OBLIGED TO REPLACE IT WITH A NEW ONE!!!
•
The position, appearance and the precise meaning of the work safety labels on the machine are
defined in the following tables and the figure .
WARNING SAFETY LABEL
LABEL TEXT
MACHINE
POSITION
Before handling the machine, carefully read
the operating manual.
Observe the instructions and safety
regulations for machine operation during
use.
P 1 H
When connecting or disconnecting, do not
step between the tractor and the machine,
also do not enter this space, if the tractor
and the machine are not at rest and the
engine is not turned off.
P 2 H
Stay out of reach of the drawn-up machine.
P 4 H
Stay outside the reach of the tractor -
agricultural machine set, if the tractor
engine is in operation.
P 6 H
The side extensible disc must be secured
with the stopper for transport and during
work.
The rear twin roller must be secured with
the stopper for transport.
Before commencing the machine transport,
secure the axle with spherical valves against
unexpected drop.
P 13 H
When folding the side frames, do not reach
into the space of the machine folding joints.
There is a danger of cutting when setting
the depth of the machine.
P 20 H
Summary of Contents for FANTOM 1050 PRO
Page 2: ...2 59 Prepared by Technical Department Farmet a s on 11 7 2019 changes reserved ...
Page 4: ...PREFACE 4 59 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 16: ...WORK SAFETY LABELS FANTOM 1250 PRO 16 59 ...
Page 30: ...COMMISSIONING Machine position for folding Machine position for unfolding 30 59 ...
