8.1 Agregation to a tractor
•
The machine can be connected only to a tractor, whose curb weight is identical or higher than
the overall weight of the connected machine.
•
The machine operator must observe all generally valid regulations of work safety, health
protection, fire safety, and environmental protection.
•
The operator may connect the machine exclusively to a tractor that is equipped with a rear
three-point suspension and a functional undamaged hydraulic system.
•
The table of requirements for the towing means for work with the machine:
Requirement for the tractor engine power for cultivator
DX 210 N
65 - 110 kW (85 - 145 HP)*
Requirement for the
tractor's TPS
Spacing of the lower suspension
joints (measured at the joint axes)
870+/- 1,5 mm (34,25 in)
ø of the hole of the lower
suspension joints for the machine
suspension pivots
28,7 - 29,03 mm (1,13 – 1,14 in)
ø of the hole of the upper
suspension joint for the machine
suspension pivot
25,7 - 25,91 mm (1,012 – 1,020 in)
Requirement for the tractor engine power for cultivator
DX 300 N
90 - 160 kW (120 - 215 HP)*
Requirement for the tractor engine power for cultivator
DX 350 N
105 - 185 kW (140 - 245 HP)*
Requirement for the
tractor's TPS
Spacing of the lower suspension
joints (measured at the joint axes)
1010 ± 1,5 mm / 870 ± 1,5 mm
(39,76 in / 34,25 in)
ø of the hole of the lower
suspension joints for the machine
suspension pivots
37,4 - 37,75 mm / 28,7 – 29,03 mm
(1,472 – 1,486 in / 1,130 – 1,143 in)
ø of the hole of the upper
suspension joint for the machine
suspension pivot
32,0 – 32,25 mm / 25,7 - 25,91 mm
(1,260 – 1,270 in / 1,012 – 1,020 in)
* Recommended towing means, the real towing force may significantly vary according to the processing
depth, soil conditions, land slope, working body wear and adjustment.
•
Connect the machine using the TPS suspension bar to the lower arms of the rear TPS of the
tractor, secure the TPS arms using pins against disconnecting.
•
Connect the third point of the tractor only to the circular hole both for work and transport.
•
The machine aggregated with the tractor changes the distribution of the weight to the
individual axles of the tractor. The weight of the front axle is reduced and therefore the
controllability gets worse. It also affects braking properties.
When connecting, no persons may stay in the space between the tractor and the machine.
20
|
36
Summary of Contents for DUOLENT DX 210 N
