Farmet DISKOMAT 6,5 PSW, Operating Manual

Page: 43 / 44

43 | 44
SERVICING AND WARRANTY CONDITIONS
15 SERVICING AND WARRANTY CONDITIONS
15.1 Servicing
Servicing is secured by the dealer after consulting with the manufacturer, possibly directly by the manu-
facturer. Spare parts then using the sales network by individual sellers in the entire country. Use only the
spare parts according to the spare parts catalogue officially issued by the manufacturer.
15.2 Warranty
1. The manufacturer provides a warranty of 24 months for these machine parts: main frame, axle,
and machine tow bar. For other parts of the machine, the manufacturer provides a warranty of 12
months. The warranty is provided from the date of sale of the new machine to the end user
(consumer).
2. The warranty applies to hidden defects that will show in the warranty period with proper use of
the machine and while fulfilling the conditions stated in the operating manual.
3. The warranty does not apply to wearable spare parts, i. e. regular mechanical wear and tear of
replaceable parts of the working sections (shares, edges, etc.).
4. The warranty does not apply to indirect consequences of possible damage, such as service life
decrease etc.
5. The warranty is bound to the machine and is not void upon an owner change.
6. The warranty is limited to the disassembly and assembly, possibly replacement or repair of the
defective part. The decision, whether to replace or repair the defective part, is up to the contractual
workshop of Farmet.
7. During the warranty period, only the authorised servicing technician of the manufacturer may
perform repairs or other interventions into the machine. In the opposite case, the warranty will not
be acknowledged. This provision does not apply to the replacement of wearable spare parts (see
point 3).
8. The warranty is conditioned by using the genuine spare parts of the manufacturer.