Farmers Friend Pyroweeder, Assembly And Instruction Manual

Page: 8 / 13

12 13
(931) 583-0397 | support@farmersfriendllc.com Well-designed, quality tools and equipment | farmers friend llc .com
S T E P 7
Attaching Flame Weeder Implement
PARTS NEEDED
•
1 × Tool Cart (from Step 4)
•
1 × Flame Weeder Implement
(from Step 6)
•
2 × 3⁄8 "-16, 3" Carriage Bolts
•
2 × 3⁄8 "-16 Nuts
•
2 × 3⁄8 " Washers
1.
Attach the Flame Weeder Implement to
the front of the Tool Bar as shown.
PARTS NEEDED
•
1 × Tool Cart (from Step 4)
•
1 × Valve Assembly (Flame Weeder
Implement, from Step 6)
•
2 × 1⁄4 "-20, 1 3⁄4 " Carriage Bolts
•
2 × 1⁄4 " Oversize Washers
•
2 × 1⁄4 "-20 Nuts
•
2 × 1⁄4 "-20 Wing Nuts
•
1 × Pyroweeder Wrench
1.
Attach the Valve Assembly to the Handle
Assembly as shown, placing the Pyroweeder
Wrench under the 1⁄4"-20 Wing Nuts .
2.
You may occasionally need to adjust or tighten nuts
as you work with your Pyroweeder. The
Pyroweeder
Wrench is attached near the handle so that it is
available at any time. For in-field adjustments,
loosen the wing nuts and temporarily remove the
Pyroweeder Wrench .
S T E P 8
Attaching Valve Assembly
H A N D L E - M O U N T E D VA LV E V E R S I O N
3⁄8 "-16 Nut
3⁄8 " Washer
Tool Bar (Tool Cart)
Tank Brace
(Flame Weeder Implement)
3⁄8 "-16, 3" Carriage Bolt
1⁄4 "-20 Wing Nut
1⁄4 "-20 Nut
1⁄4 " Oversize Washer
Pyroweeder Wrench
Valve Assembly
Control Valve
Handle Assembly
(Tool Cart)
1⁄4 "-20, 1 3⁄4 " Carriage Bolt
Attaching
wrench without a
handle-mounted valve.
1⁄4 "-20, 1 3⁄4 " Hex Bolt