EN
7
Pulse Light
Pulse light flashes upon each fence pulse. If fence voltage is poor (less
than 2000 V), the light will flash twice on each pulse. In this case check
the fence for faults.
Battery Warning Light on 12 V Operation
When 12 V battery is connected, the battery warning light indicates
voltage of the 12 V battery after each fence pulse.
- No light: Battery voltage is good.
- One flash: Under 12.15 Volts. Battery should be charged.
- Two flashes: Under 11.95 Volts. Recharge the battery!
- Three flashes: Under 11,75 Volts. Battery is empty. Deep discharge
protection is active: operating with low power and slow pulse rate.. Recharge
the battery!
Battery Warning Light on Alkaline Battery Operation
When neither 12 V battery nor mains adapter are connected, the
battery warning light indicates voltage of the alkaline batteries after
each fence pulse.
- No light: Battery voltage.
- One flash: Buy new alkaline batteries.
- Two flashes: Change the alkaline batteries.
- Three flashes: Alkaline batteries are empty. Operating with low power and
slow pulse rate.
Pulse light will stop flashing if battery voltage is no longer sufficient to give a
fence pulse.
Beeper will sound twice during the pulse if there is a problem
in the fence or with the energiser.
Fast pulse every 1.5 seconds
Slow pulse every 2.5 seconds
Speed select button
