EN
4
Assemble the earth stake stand as illustrated above. Push earth stake firmly to
the ground. Make sure it doesn't fall.
If soil is dry, the included earth stake stand may not provide sufficient earthing.
In this case use separate Olli earth rods.
Fence connection
Connect black earth wire to terminal
marked with the earth symbol
.
Connect red fence connect wire to
terminal marked with a lightning
symbol and to the fence wire.
Batteries
Energiser may be supplied from a 12 V rechargeable lead acid battery or from
four non-rechargeable 1.5 V alkaline size D batteries (type LR20). If both are
installed, the 12 V battery will be used.
Rechargeable 12 V lead acid battery:
Connect battery cord red clamp to
positive (+) battery pole and black clamp to negative (-) battery pole.
Non-rechargeable alkaline batteries:
- Remove battery holder by squeezing its handle and pull it out.
- Insert four batteries in correct polarity as shown on the battery holder.
- Firmly push battery holder back into the energiser so that it locks in place.
Do not touch the fence with the battery cord: the energiser
could be damaged! When using the energiser without a 12 V
battery, connect both battery cord clamps to the earth stake
stand instead of leaving them on the ground.
Mains Adapter (optional accessory for 122B / 62B)
The mains adapter may be used to supply
the energiser and to recharge the 12 V
battery. During a power outage, energiser
will continue to operate from the 12 V
