EN
For best results, insert probe into the “dense” side of bale at a
45˚ angle. Take readings in at least five (5) places
(approximately 15 cm apart along the bale centre-line) and use
the highest reading as a guideline.
3.3 Round Bales:
Test readings can be taken anywhere around the outside
surface of the bale, NOT THE ENDS, as long as the probe tip is
inside the outer wrap, since the outer layer tends to dry out
first. For best results, insert probe into the outside radius of
the bale at a 45˚ angle and at least 30 cm deep. Take readings
in at least five (5) places (approximately 15 cm apart ) and use
the highest reading as a guideline (see in picture above).
4. CARE AND MAINTENANCE
1.After each use, always store your tester in a clean, dry and
handy place.
2.The metal tip of the probe should be wiped clean between
each use for best results. Clean both parts of the metal tip
from time to time with fine steel wool and/or mineral spirits
or alcohol.
A dirty tip can cause lower readings.
Keep the brass
shiny for best results.
3.Never immerse the probe in water.
4.Remove the battery, if your tester will not be used for several
months.
6
Summary of Contents for FARMEX HT-PRO
Page 1: ...FARMEX HT PRO ...
