Farm King RP2, Operator And Parts Manual, Page: 26 / 64

Operation - RP2, RP4, RP5 Wheel Rake
24
Work Configuration
Transport the equipment to the area of work (see
“Transport Configuration” in Operation section).
Always comply with federal, state, local and
provincial laws regarding the transport of farm
equipment on pubic roadways.
Figure 4
The equipment must be configured from Transport
Mode into Work Mode for proper field operation
[Figure 4] .
Release the arm locking devices (Item 1) on the
equipment
[Figure 4] .
Rotate all the arm assemblies into the horizontal
position.
Figure 5
The arm locking devices are released by removing
the pin (Item 1) and removing the locking bracket
(Item 2)
[Figure 5] .
IMPORTANT
Reattach each locking device once rake is in work
mode.
DO NOT operate rake without arm locking devices
secured in the locked position with retaining pin.
WORK MODE
1
1
1
1
2
ARM LOCKING
DEVICE