Farm King RP2, Operator And Parts Manual, Page: 31 / 64

Operation - RP2, RP4, RP5 Wheel Rake
29
Figure 13
Rotate the pivot frame to be perpendicular to the
fixed frame. Secure the pivot frame in position
by installing the handle pin to Hole 1. Secure the
handle pin with a retaining pin
[Figure 13] .
Transport Configuration
Always comply with federal, state, local and
provincial laws regarding the transport of farm
equipment on pubic roadways.
Verify that the tractor / tow vehicle is approved for
transporting the equipment and that the equipment
is securely attached to the tractor / tow vehicle and
configured into Transport Mode.
Verify safety chain is installed and properly
connected before transporting equipment.
Verify that the SMV (Slow Moving Vehicle) emblem,
all lights and reflectors are clean and visible.
WARNING
AVOID INJURY OR DEATH
Keep bystanders away.
Do not allow riders.
Use of an unapproved hitch or tractor / tow vehicle
can result in loss of control, leading to serious
injury or death.
Tractor / tow vehicle and hitch must have the rated
capacity to tow equipment.
IMPORTANT
Never exceed 20 mph (32 kph) during road travel.
The equipment must be configured from Work
Mode into Transport Mode for proper road
transportation.
6 6
5 5
4 4
3 3
2
2
1
A
B
7
7
FIXED
FRAME
PIVOT
FRAME
FIXED
FRAME
PIVOT
FRAME
HANDLE
PIN