Farm King FK375, Operator And Parts Manual

Page: 6 / 42

6
Safety - Conventional Auger Mover
General Safety Instructions
• Have a first-aid kit available for use and know how to use it.
• Have a fire extinguisher available, stored in a highly visible location, and know how to use it.
• Wear appropriate protective gear. This list may include but is not limited to:
- hard hat
- protective shoes with slip resistant soles
- protective glasses or goggles
- heavy gloves
- wet weather gear
- hearing protection
- respirator or filter mask
• Read and understand the Operator’s Manual and all safety signs before operating, servicing,
adjusting, repairing, or unplugging the equipment.
• Do not attempt any unauthorized modifications to your Farm King product as this could affect
function or safety, and could affect the life of the equipment.
• Inspect and clean the working area before operating.
• Keep hands, feet, clothing, and hair away from moving parts.
• Ensure bystanders are clear of the area before operating.
Start-Up Safety
• Do not let inexperienced operators or children run this equipment.
• Place all tractor and machine controls in neutral before starting.
• Operate only with ROPS and seatbelt equipped tractors.
• Do not operate inside a building unless there is adequate ventilation.
• Ensure all shields are in place and in good condition before operating.
• Stay clear of PTO shaft and machine when engaging PTO.
• The auger must be on a level surface and wheels free to move when raising or lowering.
Everyone should be kept clear during these operations.
• Make certain electric motors are grounded.
Operation Safety
• Do not permit riders.
• Do not wear loose fitting clothing during operation.
• Empty the auger before moving to prevent upending.
• Do not allow anyone other than the operator close to the Auger when in operation.
• Never stand under the auger while raising or lowering.
• When filling tall bins, tanks, or granaries, it is advisable to anchor the auger to the bin or
building to prevent it from being tipped over by the wind or a sudden movement.
• Never operate a Conventional Auger with the intake end off the ground.
• Never operate over 540 PTO rpm speed.
• Never raise the intake end of the auger above waist high, as the balance shifts forward, and
the auger will tip over.
• Stay away from overhead obstructions and power lines during operation and transporting.
• Electrocution can occur without direct contact.