Farm King FK375 Operator And Parts Manual Download Page 39

39

Authorized Dealer and Labor Costs
Repairs eligible for labor under this limited warranty must be made by Buhler Industries Inc. or an 
authorized Farm King dealer. Buhler Industries Inc. retains the exclusive discretion to determine 
whether it will pay labor costs for warranty repairs or replacements, and the amount of such 
costs that it will pay and the time in which the repairs will be made. If Buhler Industries Inc. 
determines that it will pay labor costs for warranty work, it will do so by issuing a credit to the 
dealer’s or distributor’s account. Buhler Industries Inc. will not approve or pay invoices sent for 
repairs that Buhler Industries Inc. has not previously approved. Warranty service does not extend 
the original term of this limited warranty. 

Warranty Requirements
To be covered by warranty, each Farm King new product must be registered with Buhler 
Industries Inc. within thirty (30) days of delivery to original retail purchaser. If the customer 
decides to purchase replacement components before the warranty disposition of such 
components is determined, Buhler Industries Inc. will bill the customer for such components and 
then credit the replacement invoice for those components later determined to be covered by this 
limited warranty. Any such replacement components that are determined not be covered by this 
limited warranty will be subject to the terms of the invoice and shall be paid for by the purchaser. 

Warranty Claims:
Warranty requests must be prepared on Buhler Industries Inc. Warranty Claim Forms with all 
requested information properly completed. Warranty Claims must be submitted within a thirty 
(30) day period from date of failure repair.

Warranty Labor: 
Any labor subject to warranty must be authorized by Buhler Industries Inc. The labor rate for 
replacing defective parts, where applicable, will be credited at 100% of the dealer’s posted shop 
rate.

Exclusive Effect of Warranty and Limitation of Liability

TO THE EXTENT PERMITTED BY LAW, BUHLER INDUSTRIES INC. DISCLAIMS ANY 
WARRANTIES, REPRESENTATIONS, OR PROMISES, EXPRESS OR IMPLIED, AS TO THE QUALITY, 
PERFORMANCE, OR FREEDOM FROM DEFECT OF THE COMPONENTS AND PARTS COVERED BY 
THIS WARRANTY AND NOT SPECIFICALLY PROVIDED FOR HEREIN.

TO THE EXTENT PERMITTED BY LAW, BUHLER INDUSTRIES INC. DISCLAIMS ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ON ITS 
PRODUCTS COVERED HEREIN, AND DISCLAIMS ANY RELIANCE BY THE PURCHASER ON 
BUHLER INDUSTRIES INC.’S SKILL OR JUDGMENT TO SELECT OR FURNISH GOODS FOR ANY 
PARTICULAR PURPOSE. THE PURCHASER’S ONLY AND EXCLUSIVE REMEDIES IN CONNECTION 
WITH THE BREACH OR PERFORMANCE OF ANY WARRANTY ON PRODUCTS MANUFACTURED 
BY BUHLER INDUSTRIES INC. ARE THOSE SET FORTH HEREIN. IN NO EVENT SHALL BUHLER 
INDUSTRIES INC. BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BY WAY OF EXAMPLE ONLY AND NOT LIMITATION, LOSS OF CROPS, LOSS OF PROFITS OR 
REVENUE, OTHER COMMERCIAL LOSSES, INCONVENIENCE, OR COST OF REPLACEMENT 
OF RENTAL EQUIPMENT). IN NO EVENT SHALL FARM KING’S CONTRACT OR WARRANTY 
LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. 

Warranty - Conventional Auger Mover

Summary of Contents for FK375











































Reviews: