Farm King Allied 6025, Operator And Parts Manual

Page: 44 / 82

Operation - Hydraulic Series
40
Connecting The Snowblower To
Skid Steer
Figure 29
The implement should be blocked and positioned
on a flat level surface.
Enter the tractor operator’s position (see “Entering
The Operator’s Position” in the Operation section).
Start the engine.
Move the tractor into position behind the
implement skid steer mount plate (Item 1) [Figure
29].
Stop the engine and leave the operator’s position
(see “Leaving The Operator’s Position” in the
Operation section).
Proceed with connecting the tractor and implement
skid steer mounts.
IMPORTANT
See tractor operator’s manual for proper
connection to the implement.
WARNING
AVOID INJURY OR DEATH
Before moving the tractor, look in all directions
and make sure no bystanders, especially small
children are in the work area.
Do not allow anyone between the tractor and the
equipment when connecting.
WARNING
AVOID INJURY OR DEATH
Keep fingers and hands out of pinch points when
connecting and disconnecting equipment.
WARNING
AVOID INJURY OR DEATH
All locking pins must be fully installed and secured
when mounting the snowblower.
Failure to secure pins can allow attachment to
come off and cause injury or death.
1