17
Operation - 2895 Loader
For back grading, either load the bucket and
position the heel on the ground or position the
bucket at 40° or less below level as shown. Place
the valve in the float position and back up slowly.
Important: Float position must be used to reduce
down pressure, otherwise cylinder rod(s) and/or
bucket damage could occur.
A Frame:
Regular Duty / Heavy Duty 60"
Both A-frames are for handling medium to
large sized round bales (up to 2000 lbs) when
fitted with two bottom 1240mm long heat treated
spears and two short stabilizers. For pallet
applications with a maximum payload of 4400 lbs
when fitted with the 48.0” pallet fork kit.
Note: The heavy duty frame can also be fitted using
only the one center spear.
Summary of Contents for Allied 2895
