Farm King 4480XD Quick Start Manual Download Page 1

Page: 1 / 11

QUICK START GUIDE

4480XD BALE CARRIER

Buhler Trading Inc. 1260 Clarence Ave. Winnipeg, MB. R3T 1T2
Tel.: (204) 661 - 8711 | Fax: (888) 524 - 1003 | www.farm-king.com

Instruction

FK440

Product

4480XD Bale Carrier

Subject

Quick Start Guide

Date

June 21, 2021

Summary

Quick start guide for TMs, Dealers, and End Users upon initial setup of the Farm King
4480XD Bale Carrier onto tractor.

4480XDs are cycled at least three times with a hydraulic test unit (not a tractor) for each
function while at the factory. This is to get air out of the hydraulic system and verify all
functions operate.

The display is then calibrated, cycled in auto-mode three times, and packaged for that
particular unit upon shipping.

It is advised that the dealer perform the pre-delivery inspections as well as assisting
end user with calibration setup onto tractor.

Summary of Contents for 4480XD












Search results

Summary of Contents for 4480XD

Reviews:

Related manuals for 4480XD

Brands by name

Popular brands

Farm King 4480XD, Quick Start Manual

Search results

Summary of Contents for 4480XD

Reviews:

Related manuals for 4480XD

Brands by name

Popular brands