Farm King 1050, Operator And Parts Manual

Page: 98 / 168

Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger
96
SERVICE SCHEDULE
Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and
early failures. The service schedule is a guide for correct maintenance of the equipment.
# DESCRIPTION
SERVICE PROCEDURES
Check Clean Lube Change Adjust Drain
Daily Maintenance (or every 8 hours)
1 CV Joints, U-Joints and Bearings •
2 PTO Driveline •
3 Universal Joint (Front) •
4 Lower & Upper Lift Arm Pivots •
5 Hopper Drive Shaft & U-Joints •
6 Intake Auger Shaft & U-Joints •
7 Dual Auger Hopper Drive Chains •
Weekly (or every 50 hours)
8 Lower Intake Auger Gearbox Oil Level •
9 Upper Intake Auger Gearbox Oil Level •
10 Main Gearbox •
11 Wheel Lug Nut Torque •
12 Winch Cable •
13 Bridging Cable Tension •
Semi-Annually (or every 250 hours)
14 Bridging Cables • • •
15 Backsaver Auger •
Annually (or every 500 hours)
16 Lower Intake Auger Gearbox Oil •
17 Upper Intake Auger Gearbox Oil •
18 Main Gearbox •
19 Main Tubes •
IMPORTANT
If a problem is encountered that is difficult to solve, even after having read through this troubleshooting
section, please call your local Farm King dealer. Before you call, please have this Operator And Parts
Manual and the serial number of your machine at hand.