21
If your heater is not working properly, or if you are having troubles with the
new FARHO home automated system, you may find a solution in the
following list:
If the screen shows the word "Blocked" every time you press a
key of the pad, it means that the heater keypad is blocked. Please
see the section entitled "How to block or unblock the keypad"
If the keypad don´t act as expected, turn off the heater using the
switch placed beneath the keypad, wait a few seconds and turn on
the heater again.
If the room temperature is lower than the required temperature and the
heater is not heating check the next:
If the required temperature is flickering, wait a few minutes.
Perhaps it is too soon to feel the heat in the surface of the heater.
If the required temperature is not flickering, maybe the heater is
waiting for permission to start heating. If you have a control
device, such as Nexho UC, Nexho RM or Nexho NT and the power
control is active, no heater starts to heat before the control device
checks the availability of free power. In this case wait until other
TROUBLESHOOTING
The FARHO XANA PLUS is not responding to the
controls
The FARHO XANA PLUS is not heating
