16
Xana Plus heater allows to set 6 different program blocks for each day of
the week.
Each block includes the start time, the end time and the temperature
required for that time period.
Please, keep in mind that a block is not allowed to start in one day and ends
in a different day. To make a program that involves two different days, split
it in two blocks, one finishing at 00:00 of the first day and the other
starting at 00:00 of the next day (each one in its corresponding day of the
week).
In order to help you doing the programs, we have included a table showing
all the blocks for all the days of the week (see page 20). You can use it as a
template to perform programs that best suit your needs, and then you only
need to follow that table and the instructions below to set the programs in
the heater:
How to customize programs?
Go to “Programs” menu and select “Edit”. Check the days of
the week you wish to customize. Then, select “Accept” by
pressing the
key. Use the
,
and
keys to set
and accept the start time, the finish time and the required
temperature for each block. Repeat this operation for each
block (keep in mind you have six time blocks). If you do not
wish to enter any more blocks, press the
key at the
beginning of a new one.
