DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
November 2013 86
.
Remove/Replace the IR Sensors D930609 (short) D930614 (tall)
Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2
Remove the Flipper Covers.
3
Push the sensor out using some pressure. This sensor snaps in and out. Do not use a metal tool or it
may damage the sensor.
4
Replace both upper and lower sensor at the same time.
5
Connect to J4 on the PCB. Make
NOTE:
of wire routing.
Tools needed:
T10 Torx screwdriver
Estimated Repair Time: 20 min
Preparation:
Remove the Covers
Important:
This procedure can only be performed by
authorized service personnel.
