manualshive.com logo in svg

FARGO electronics HDPii, User Manual

Share
Download
FARGO electronics HDPii User Manual Download Page 219

RESTRICTED USE ONLY 

 

Fargo Electronics, Inc. 

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 

 

7-32

Using the Print Both Sides - Split 1 Set of Ribbon Panels option 

Use this option to provide the most economical means of printing a dual-sided card since a 
single set of Ribbon Panels will be split to print both the front and backside of a card.  

•

  This option becomes active when 

Print Both Sides

 is checked.  

•

  The Default is active and unchecked except for YMCKK, which is checked. 

Step Procedure 

1 

Select this option to automatically print full-color on the front of a card and 
resin black on the back of a card (using YMCKK Print Ribbons).  

•

  If using a YMCKK Ribbon, the front of the card is printed with the YMCK 

Panels and the back is printed with the second K Panel.  

(

Note #1:

  This option is automatically enabled when a YMCKK Ribbon type 

is selected.)  

(

Note #2: 

 This option is not available if using a YMCKH Ribbon.) 

 

 

 

Summary of Contents for HDPii






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands