manualshive.com logo in svg

FARGO electronics Card Printer, User Manual, Page: 2 / 96

Share
Download
FARGO electronics Card Printer User Manual Download Page 2

Notices

The information in this document is subject to change without notice.

NO WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

No liability is assumed for errors contained herein or for incidental damages in connection
with the furnishing, performance, or use of this material.

This document contains proprietary information which is protected by copyright. All rights
are reserved.  No part of this document may be photocopied, reproduced, or translated into
another language without prior written consent.

Patent Pending

Trademark Acknowledgements

IBM is a registered trademark of International Business Machines Corporation.  Windows is
a trademark of Microsoft Corporation. All other trademarks are the property of their
respective owners.

Printing History

Edition 1.0, #981023

© Copyright 1998 All rights reserved.

iii

4250/4225 Card Printer UserÕs Manual

510291_card printer  11/24/98 12:18 PM  Page iii

Summary of Contents for Card Printer

































































































Reviews:

No comments