manualshive.com logo in svg

FARGO electronics Card Printer, User Manual, Page: 19 / 96

Share
Download
FARGO electronics Card Printer User Manual Download Page 19

14

Section 3:  Getting Started

4250/4225 Card Printer UserÕs Manual

C. UNPACKING AND INSPECTION

While unpacking your printer, inspect the carton to ensure that no damage has
occurred during shipping. Make sure that all supplied accessories are included
with your unit. The following items should be included with your printer:

■

Printer

■

Power Supply (see Section 3-D)

■

Cleaning Roller (see Section 3-F)

■

Printer Driver Software (see Section 5)

■

32-bit Print Spooler Software; for Windows 95/98 only (see Section 5-C)

■

Warranty Statement and Registration Card

■

This manual and other printed information

Save the carton and packing materials. They will come in handy when transporting
the unit.

D. APPLYING POWER

The power supply included with the printer is a universal power supply properly
configured for the power used in your country. To connect this power supply to the
printer, locate the appropriate power cord for your country and refer to the
following steps:

CAUTION!

THE INCLUDED POWER SUPPLY IS DESIGNED FOR USE ONLY WITH THE
COLOR ID CARD PRINTER. IF YOU HAVE ANY DOUBTS ABOUT THE
PLUG CONFIGURATION OR THE VOLTAGE, 

DO NOT ATTEMPT TO USE

THE PRINTER.

CONTACT YOUR AUTHORIZED RESELLER FOR

INFORMATION ON THE CORRECT POWER SUPPLY CONFIGURATION.

1.

Place the power cord into the power cord port of the power supply.

510291_card printer  11/24/98 12:18 PM  Page 14

Summary of Contents for Card Printer

































































































Reviews:

No comments