- 9
-
Mi 2582
IT
ALIANO
EN
GLISH
FR
ANÇAIS
ES
PAÑOL
P
OR
T
UGUÊS
NOTICES
-
The switching of the audio channels may be
affected by the acoustic configuration of the
surrounding environment.
- Only specialized personnel must do the instal-
lation according with the regulations in force.
- Use AWG18 cables for mains connection.
- The device must not be exposed to water.
- The power supplies are protected against over-
loads or short circuits. To reset, switch off the
mains voltage for approx. 1 minute and then
switch on after the fault has been removed.
Technical specifications.
Wi-fi hands-free colour video intercom with
7.0" LCD screen for series
.
Data sheet
Power supply:
from the line
Current: - stand-by:
1,7 W
- operating: 8,2 W
Screen:
7" TFT LCD
Resolution:
1024x600
Maximum distance:
100-m
Operating temperature:
0 ÷ +40°C
Maximum humidity:
90% RH
Terminal boards
SW+/SW-
Floor call input
12V/GND
Additional ringer output
Connection to the riser
:
2-wires not polarised
Signalling LED
Green LED: normal operation
.
Steady red LED
:
do not disturb
mode activated
Red flashing LED
:
there are
not answered calls
Parts and functionalities.
Parts and functionalities
Description
[1]
Digital LCD touch screen
Display the visitors' picture.
[2]
Power/No Disturb indicator
Show the power status of the system.
Show the not disturb mode.
[3]
Talk/Mon button
Press to communicate hands free with visitor.
Press to view the outdoor condition in standby mode.
[4]
Unlock button
Press to release the door lock.
[5]
Speaker
Send out sounds of ring tones,audios and alarms.
[6]
Upgrade button
Use to upgrade the software.
[7]
SD card slot
Use to insert micro-SD card
[8]
DIP
Use to set video impedance.
[9]
Terminal connector
SW+,SW-: Extra door bell call button connection port.
12V,GND:
Extra buzzer connection port (12 Vdc-250 mA max).
[10]
Micro USB socket
For data transfer.
[11]
2 wire connector
For 2 wire system.
[1]
[9]
[2]
[3]
[4]
[6]
[7]
[5]
[8]
BUS
MicroSD
GND
12V
SW-
SW+
1
ON
[10]
[11]
[1]
[9]
[2]
[3]
[4]
[6]
[7]
[5]
[8]
BUS
MicroSD
GND
12V
SW-
SW+
1
ON
[10]
[11]
