11
Turntable Installation
Countertop Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
1. Select a level surface that provide enough
open space for the intake and/or outlet
vents.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the frequency
is the same as the voltage and the frequency
on the rating label.
WARNING
- Do not install oven over
a range cook-top or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and the
warranty would be void.
A minimum clearance of 3.0 inches (7.5cm) is
required between the oven and any adjacent
walls. One side must be open.
The accessible
surface may be hot
during operation.
· Leave a minimum clearance of 12 inches
(30cm) above the oven.
· Do not remove the legs from the bottom of
the oven.
· Blocking the intake and/or outlet openings
can damage the oven.
· Place the oven as far away from radios
and TV as possible. Operation of
microwave oven may cause interference
to your radio or TV reception.
a. Never place the glass tray upside down.
The glass tray should never be restricted.
b. Both glass tray and turntable ring
assembly must always be used during
cooking.
c. All food and containers of food are always
placed on the glass tray for cooking.
d. If glass tray or turntable ring assembly
cracks or breaks, contact your nearest
authorized service center.
Cabinet: Remove any protective film found
on the microwave oven cabinet surface. Do
not remove the light brown Mica cover that
is attached to the oven cavity to protect the
magnetron.
Hub (underside)
Turntable shaft
Turntable ring assembly
Glass tray
3.0 inch(7.5cm)
3.0 inch(7.5cm)
12 inch(30cm)
OPEN
