19
TROUBLESHOOTING
Problem
Cause
Solution
The appliance is not
working
Magnetic Plug not properly
fitted
Connect the Magnetic
Plug to the electrical outlet
before connecting the plug
to the wall outlet
Control Panel Assembly not
installed correctly
Install the Control Panel
Assembly correctly
Appliance not plugged in
Insert the plug into the wall
outlet
Wall outlet not energized
Check fuses and circuit
breaker
Malfunctioning appliance
Unplug the appliance from
the wall outlet and contact
qualified personnel to check
and repair the appliance
Overheated oil or appliance Unplug the appliance from
the wall outlet and allow the
appliance / oil to cool down.
Then press the Reset Button.
Oil is spilling over the
rim
Overfilled Oil Reservoir
Unplug the appliance from
the wall outlet and allow the
appliance / oil to cool down.
Then, remove excess of oil
Overfilled basket
Lift out the basket by its
handle and hang it onto the
Basket Hook into the notch.
Remove excess of food with
suitable utensils
The appliance is
working but the
POWER indicator does
not light up
Damaged POWER indicator Unplug the appliance from
the wall outlet and contact
qualified personnel to check
and repair the appliance
After the filtration dial
is turned to the correct
position, the Fryer is
not filtering the oil, or
filtration is very slow, or
filtration stops while a
lot of oil remains in the
reservoir
The Oil Reservoir is not
properly seated in the
housing
Once oil is cool enough,
press firmly on the front of
the oil pan, to adjust the
position of the reservoir and
open the valve
