manualshive.com logo in svg

Faraone ELEVAH 61, Translation Of The Original Instructions

Share
Download
Faraone ELEVAH 61 Translation Of The Original Instructions Download Page 5

 

USE AND MAINTENANCE MANUAL - SECTION 1 

 

ELEVAH 61 AERIAL PLATFORM – Rev. 03_2020 

Page 1-1 

 

SECTION 1. 

SAFETY PRECAUTIONS 

 

GENERAL INFORMATION 

 
This section illustrates the necessary precautions for correct and safe use of the machine and its 
maintenance. To guarantee correct use of the machine, it is essential to establish a daily routine 
procedure based on the instructions provided in the manual. Also, to guarantee safe operation of the 
machine,  it  is  necessary  for  a  skilled  person  to  establish  a  maintenance  schedule  based  on  the 
information provided in this manual, which must be strictly complied with. 
 
The owner/user/operator/company granting in leasing/person receiving in leasing the machine, must 
not accept responsibility of its operation before having carefully read the manual and completed the 
training and the functioning procedures, guided by an experienced and skilled operator. 
 
For  further  information  relating  to  safety,  training,  inspection,  maintenance,  application  and 
operation, contact Faraone Industrie Spa. 
 
 

 

ATTENTION 

FAILURE TO COMPLY WITH THE SAFETY PRECAUTIONS LISTED IN THE MANUAL MAY 

DAMAGE THE MACHINE AND THE PROPERTY AND CAUSE INJURIES OR FATAL 

ACCIDENTS.

 

 

 

Summary of Contents for ELEVAH 61































































Reviews:

No comments

Brands by name

Popular brands

Load more brands