FAR VTP40IX-17 CI, Manual

Page: 37 / 81

ENGLISH
6
Follow below instructions to continue assembling:
A. Loosen the screw (3) located on the back of the fan black, turn it antil you cannot see its
bottom inside the tube’s hole. Insert the fan blade (2) on the motor shaft until its position.
B. Tighten the screw (3) onto the motor shaft until its blocking point as shown on the picture.
Turn manually the fan blade on the right and on the left to ensure the good assembling.
Follow belows instructions to continue assembling:
A. Unscrew the screw (1c) and the washer (1d) located on the hook (1b). Place the front grid
facing the back grid, ensure the hook with the screw hole is aligned with the hole on the
circling of the back grid.
B. Close each hook (1a) of the front grid onto the circling of the back grid. Then tighten the
screw (1c) with its washer(1d) through the 2 aligned holes of the grids.
Test of appliance before first use:
Ensure that the speed variator is set on position 0 (stop). Plug in the appliance. Turn
the speed variator to set on 1 to select slow speed and push on the oscillation function
button, check that the fan works:
o
Head of the fan turn without issues at regular speed.