ENGLISH
ENGLISH
GB-33
GB-32
The gas rail
seal
11.5 Female coupler
• It is the law that all gas appliances are installed
by competent persons in accordance with the
(A) SEALING STRIP
(B) BRACKET
(C) SCREW
1. Place the bracket
(B) over the holes that
match the size of the
screws.There are one set
of screw holes in each
corner of the hob (H) .
Slightly tighten a screw
(C) through the bracket
(B) so that the bracket
is attached to the hob,
but so that you can still
adjust the position.
2. Carefully turn the
hob back over and then
gently lower it into the
aperture hole that you
have cut out.
3. On the underneath
of the hob, adjust the
brackets into a position
that is suitable for your
worktop.
Then fully tighten the
screws (C) to secure the
hob into position.
GAS CONNECTION
•
This appliance must be installed and
connected in accordance with installation
regulations in force in the country in
which the appliance is to be used.
•
This appliance is supplied to run on
LPG and natural gas . Conversion for
use on LPG and natural gases must only
be undertaken by a qualified person.
LPG > NG
NG > LPG
Gas supply replacement and installation
guidelines:
The gas rail
seal
G1/2"Female coupler
