ENGLISH
GB-13
Running the
dishwasher
Turn on the water tap and press the Start/ Pause button. The
machine will start working after about 10 seconds.
• Changing the
programme
1.
A running cycle can only be modified if it has been running
for a short time. Otherwise the detergent may have already
been released and the water already drained. If this is the
case, the detergent dispenser must be refilled.
2.
Press the Start/ Pause button .then press the program
button more than 3 seconds to cancel the running
programme.
3.
Select a new programme.
4.
Restart the dishwasher.
• Add forgotten
dishes in the
dishwasher.
1.
Press the Start/ Pause button
to stop the machine.
2.
Open the door.
3.
Add the forgotten dishes.
4.
Close the door, then press
the Start/ Pause button,
the dishwasher will start running again after 10 seconds.
• If the appliance
is switched off
during a wash
cycle.
• If the appliance is switched off during a wash cycle, when
switched on again, please re-select the washing cycle and
operate the dishwasher according to the original Power-on
state).
Switch off the
appliance
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power button.
Since the appliance is standing by, it will power off
automatically after 30 minutes without any operation.
Turn off the water
tap, unload the
baskets
Warning: wait a few minutes (about 15 minutes) before
unloading the dishwasher to avoid handling the dishes and
utensils while they are still hot and more susceptible to break.
They will also dry better. Unload the appliance, starting from
the lower basket.
WARNING!
Open the door
carefully. Hot steam
may escape when the
door is opened!
