ENGLISH
ENGLISH
GB-57
GB-56
Problem
Possible
Causes
What to Do
Unsatis-
factory
washing
result
The dishes
are not clean
The filter
combina-
tion in the
base of wash
cabinet is not
clean or is
not correctly
fitted. This
may cause the
spray arm jets
to get bloc-
ked.
Clean and/or fit the
filter combination cor-
rectly. Clean the spray
arm jets. See “Clea-
ning the Spray Arms”.
Cloudiness
on glassware
Combination
of soft water
and too much
detergent.
Use less detergent if
you have soft water
and select a shortest
cycle to wash the
glassware and to get
them clean.
Black or gray
marks on
dishes
Aluminum
utensils
have rubbed
against
dishes.
Use a mild abrasive
cleaner to eliminate
those marks.
Detergent
left in dis-
penser cups
Dishes block
detergent
cups.
Re-loading the dishes
properly.
Problem
Possible
Causes
What to Do
Unsatisfac-
tory drying
result
The dishes
are not
drying
Improper
loading
Load the dishwasher
as suggested in the
directions.
Too little
rinse-aid
Increase the amount
of rinse-aid/refill the
rinse-aid dispenser.
Dishes are
removed too
soon
Do not empty your
dishwasher imme-
diately after washing.
Open the door slightly
so that the steam can
escape. Begin un-
loading the dishwasher
only once t he dishes
are barely warm to
the touch. Empty the
low basket first. This
prevents water form
dropping off dishes in
the upper basket.
