PLACING OF THE INSERT
(fig.
f4-f5-f6
)
Check that the threaded tie rod (
A
) and head (
B
) couple as-
sembled on the riveting tool is suitable to the size of the insert
to be used. Adjust the stroke as indicated (fig.
f2-f3
).
Introduce the insert on the tie rod (
A
) and push slightly on it
as indicated in
f4
, so as to make it clamp automatically on the
threaded tie rod. Make sure that the insert head touches the
head (
B
) checking that the tie rod (
A
) comes out of 2mm from
the insert.
In case of further adjustments of the tie rod (
A
) follow the
instructions of page 18.
It is now possible to place the insert pushing the button (
D
)
(fig.
f5
) until the insert is completely pulled, and push the but-
ton (
P
) to release the tie rod (fig.
f7
).
For a correct placing and right working of the machine the
inserts to be used should be properly cleaned.
NOTE:
According to the desired clamping, carry out other
adjustments of the riveting tool stroke, rotating the knob (
M
)
(fig.
f2-f3-f6
), if necessary.
Insufficient deformation =
the insert could rotate inside the
housing comprising its use and resistance.
Excessive deformation =
possible damages of the insert
and tie rod (
A
) with eventual breaks of both components.
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au
Summary of Contents for KJ 45/S
