Spectification
1>
"+"
"-"
3
,
Long press on
or
for more than
seconds the date will progressively and rapidly increase or
decrease in the rate of
seconds
5
.
2>
,
5
,
When setting each of the mode if there is none operation for
minutes then it will return to waitting
state
.
3>
,
"
"
3
When setting each of the function long press on
for
seconds can cancel current setting and
enter to waitting state remark When setting the system time revised time date will be displayed when
.(
:
,
return to waitting state
.
4>
,
" +" "
" ,
,
During time function setting long press on
a beep sounds it can cancle the curent time
function setting
.
5>
15
200
We suggest that you run the oven elements for
minutes at
degrees to burn off any residuce
from their surfaces
.
2>
" +" "- "
. (
.)
Use
button to adjust finishing time Refer to the instructions for setting the correct time of day
3>
,
'
some time after the adjustment operation is completed the day s time will appear on the screen and
the symbols A
will light on the screen While doing this the oven will also start to operate
" " "
"
.
,
.
3>
,
.
,
At the completion of the set duration the timer will stop the oven and give an dudible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature
" "
.
button to
position Long pressing any key for
second it will stop the audible waring
"0"
.
3
,
.
Full automatic programming
-
:
This function is used to cook after a certain period of time with a certain duration The food to be cooked
,
.
is put into the oven The oven is adjusted to the desired cooking function The oven temperature is adjusted
.
.
.
to the desired degree depending on the food to be cooked
First
:
"
"
"
"
.
" +" "- "
Press
button until you see Dur on the timer screen Use
button to adjust cooking
period for the food you wish to cook Some time after the adjustment operation is completed the day s
.
,
'
time will appear on the screen and the symbols A will begin to continuously light on the screen
" "
.
Second
:
keep pressing on
button until you see End on the timer screen When you see End on
"
"
"
"
.
"
"
the timer screen the symbol A and the day s time will begin to flash with the addition of the set cooking
,
" "
'
,
period Adjust the finishing time for the food by using the
and
keys while the timer is in this position
.
,
"+"
"-"
,
.
Some time after the adjustment operation is completed the day s time will appear on the screen and the
,
'
symbol A will begin to continuously light on the screen
" "
.
You can set a time which can be up
hours after the time obtained by adding the cooking
23.59
period to the day s time
'
.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time and will stop at the set finishing time The timer will give an audible warning and the symbol A will
,
.
" "
begin to flash After bringing the cooking function and oven temperature button to
position Long
.
"0"
.
pressing any key for
second it will stop the audible waring
3
,
.
Please note Once setting full automatic mode all the time can not be changed Change time means cancle
:
-
,
.
automatice progamme and enter into corresponding mode If you need to reset automatic mode need to
.
,
stop setting the current mode to set the automatice mode according to the above steps again
,
.
6