ENGLISH
ENGLISH
GB-37
GB-36
• Do not disassemble
the valve sleeve:
in the event of a
malfunction, change
the entire valve.
• Before replacing
the burners on the
plate, make sure that
the injector is not
blocked.
• A complete
operational must be
conducted after the
gas conversion to
detect any leakage
of gas (use soap and
water or a gas leak
detector)
After completing
the conversion,
a qualified
technician or an
installer must
mark a «V»
on the correct
category of gas to
match the setting
on the rating
plate. Remove
the previous «V»
mark.
• Repairs must be carried out by an approved
technician only.
• Any incorrect repair can result in considerable
danger for you and other people.
• However, some minor problems can be
resolved as follows:
TROUBLESHOOTING
Problem
Probable cause Solution
No ignition
No spark
Check the
electrical
supply
The cover of
the burner is
not assembled
correctly
Assemble the
cover properly
The gas supply
is disabled
Completely
open the gas
supply
