ENGLISH
ENGLISH
GB-25
GB-24
Gas Connection
•
This appliance must be installed and
connected according to the installation
standards in force in the country in which
the appliance is used.
•
This device is supplied by LPG gas or
natural gas. Conversion for use with LPG
and natural gas must only be carried out by a
qualified person.
Replacement of gas supply and guidelines for
installation:
The gas rail
sealant
G1 / 2" female coupler
LPG > NG
The mastic gas rail
sealant
11.5 female coupler
(not included)
NG > LPG
A
B
C
(A) Sealing strip
(B) BRACKET
(C) SCREW
1. Place the bracket
(B) on the holes that
correspond to the size
of the screws. There is
a set of screws for the
holes in each corner of
the hob (H). Lightly
tighten one screw (C)
through the bracket
(B) so that the bracket
attaches to the hob but
in such a way that the
hob can still be adjusted.
2. Put the hob back in
place and then gently
lower it into the
opening you have cut
into your worktop.
3. Under the hob, adjust
the brackets to the
appropriate position
for your worktop. Then
retighten the screws
completely (C) to secure
the hob in position.