Example 2:
Valve pin position
Connect the
BLUE
wire to the Neutral.
Connect the
BLACK
wire to terminal
9
.
Connect the
BROWN
wire to terminal
6
.
Fluid
HOT
Fluid
COLD
Fluid
MIXED
Probe Installation
Flow T probe
The flow T probe is supplied complete with accessories to match different kinds
of installation:
•
Kit for the installation direct on the pipeline
•
1/2” seat
•
M1”x1/2” reduced plug
7
Using the kit for contact assembly located in the box with the control unit, place
the probe directly in contact with the supply pipe and secure it with the cable tie.
CONTACT INSTALLATION
1/2 “ Tee fitting
NOT PROVIDED
1” Tee fitting
NOT PROVIDED
Insert the probe in the 1/2” seat and place it in a suitable Tee fitting with 1/2”
female connection (NOT SUPPLIED) on the supply pipe.
INSTALLATION WITH 1/2” TEE FITTING
INSTALLATION WITH 1” TEE FITTING
Insert the probe in the 1/2” seat. Then screw the seat of the reduction cap and
introduce it into a suitable tee fitting with 1” female connection (NOT SUPPLIED)
on the supply pipe.
www.far-moscow.ru Москва, ул. Народного Ополчения, д. 34, стр. 3 (499) 519-03-69
Summary of Contents for 9611
