6
Start Using
Before you start to use equipment, please make the following installation:
6.1
Connecting the power supply and the network
6.1.1
Connecting network
In prior to this step, please check if your network can work normally and have
capacity of broadband internet access.
z
Broadband Router
Connect one end of the network cable to the intercom WAN port, the other
end is connected to your broadband router’s LAN port, so that the completion of
the network hardware connections. In most cases, you must configure your
network settings to DHCP mode.
Figure 1
z
No Broadband Router
Connect one end of the network cable to the intercom WAN port, the other
end is connected to the broadband modem to your LAN port, so that the
completion of the network hardware connections. In most cases, if you are using
the cable broadband, you must configure your network settings to DHCP mode;
if you are using the ADSL, you must configure your network settings to PPPoE
mode.
Figure 2
3
