RTSP Information
Main
Stream
Url
Access the main address of RTSP
Sub Stream Url
Access the child address of RTSP
7.3.4.4
MCAST
Figure 30
It is easy and convenient to use multicast function to send notice to each
member of the multicast via setting the multicast key on the device and sending
multicast RTP stream to pre-configured multicast address. By configuring
monitoring multicast address on the device, monitor and play the RTP stream which
sent by the multicast address.
z
MCAST Settings
Equipment can be set up to monitor up to 10 different multicast address, used to
receive the multicast RTP stream sent by the multicast address.
Here are the ways to change equipment receiving multicast RTP stream
processing mode in the Web interface: set the ordinary priority and enable page
priority.
Priority:
In the drop-down box to choose priority of ordinary calls the priority, if the
priority of the incoming flows of multicast RTP, lower precedence than the current
common calls, device will automatically ignore the group RTP stream. If the priority
of the incoming flow of multicast RTP is higher than the current common calls
priority, device will automatically receive the group RTP stream, and keep the
32
