[
键入文字
]
35
/
59
The options are as follows:
1-10: To definite the priority of the common calls, 1 is the top level while 10 is the lowest
Disable: ignore all incoming multicast RTP stream
Enable the page priority:
Page priority determines the device how to deal with the new receiving multicast RTP stream
when it is in multicast session currently. When Page priority switch is enabled, the device will
automatically ignore the low priority multicast RTP stream but receive top-level priority multicast RTP
stream, and keep the current multicast session in state; If it is not enabled, the device will
automatically ignore all receiving multicast RTP stream.
Web Settings:
The multicast SS priority is higher than that of EE, which is the highest priority.
Note: when pressing the multicast key for multicast session, both multicast sender and receiver will
beep.
Listener configuration
Blue part (name)
"Group 1","Group 2" and "Group 3" are your setting monitoring multicast name.The group name will
be displayed on the screen when you answer the multicast. If you have not set, the screen will display the
IP: port directly.
