[
键入文字
]
28
/ 51
Enable Strict UA Match
Enable or disable Strict UA Match
STUN Settings
Server Address
STUN Server IP address
Server Port
STUN Server Port – Default is 3478.
Binding Period
STUN blinding period – STUN packets are sent at this interval to
keep the NAT mapping active.
SIP Waiting Time
Waiting time for SIP. This will vary depending on the network.
TLS Certification File
Upload or delete the TLS certification file used for encrypted SIP transmission.
Note: the SIP STUN is used to achieve the SIP penetration of NAT, is the realization of a service, when the
equipment configuration of the STUN server IP and port (usually the default is 3478), and select the Use
Stun SIP server, the use of NAT equipment to achieve penetration.
c)
Dial peer
Import Dial peer Table
Field Name
Explanation
Select File
Select an existing dialing rule file.
The file type must be a .CSV
Add Dial Peer
Number
In order to add an outgoing call number, the outgoing call number can be divided
into two types: one is the exact match, and after the exact match, if the number is
exactly the same as the user dialing the called number, the device will use the IP
address of this number mapping or (This is the area code prefix function of the
PSTN). If the number matches the N-bit (prefix number length) of the called
number, the device uses the IP address or configuration mapped to this number.
