29
/ 40
8.13 LINES / Dial Plan
Figure 18 - Dial Plan Configuration
The device supports 8 dialing modes:
Press # to Send - Dial the desired number, and press # to send it to the server.
Dial Fixed Length – Configure the fixed length to dial out
Send after seconds – Number will be sent to the server after the specified time.
Press # to Do Blind Transfer - Press # after entering the target number for the transfer. The phone will
transfer the current call to the third party.
Blind Transfer on Onhook - Hang up after entering the target number for the transfer. The phone will
transfer the current call to the third party.
Attended Transfer on Onhook - Hang up after the third party answers. The phone will transfer the current
call to the third party.
Attended Transfer on Conference Onhook - Hang up during a 3-way conference call, the other two ways
will make a call.
Press DSS Key to Do Blind Transfer – When user is in the ‘XFER’ screen, user can fulfill Blind Transfer
by pressing DSS Key.
8.14 LINES / Global Settings
Configure global settings for lines.
Table 3 - Global Settings for Lines on Web
Parameters
Description
SIP Settings
Local SIP Port
Set the local SIP port used to send/receive SIP messages.
Registration Failure Retry Interval
Set the retry interval of SIP REGISTRATION when registration
failed.
