3 / 6
1
Introduction to the Phone User Interface
1.1 Keypad
The above picture shows the keypad layout of the device. Each key provides its own specific function.
User should refer to the illustration in this section about the usage of each key and the description in this
document about each function.
Hold key - You could hold a call by pressing the key.
Transfer key - You could transfer a call by pressing the key.
Standard Telephone Keys - The 12 standard telephone keys provide the same function as standard
telephones
Volume -/+ - By pressing ‘Volume -/+’ button, user can adjust the volume.
Redial - By pressing ‘Redial’ button, user can redial the last dialed number.
Ringing Light - When there is a call ringing, the ringing lights will flicker, only when the
speakerphone ring volume is 8 and 9.
Working Light - When you pick up the handset, the working light will be lit.
Power Light - When the device is power on, the power light will be lit.
Transfer key
Volume Control
Receiver
Hold key
Redial
MIC
Standard
Telephone Keys
Power Light
Working Light
Ringing Light
